Decorative Cross


I was cutting out these shelf brackets from mahogany and noticed a pretty left-over design. Well, I must make something out of that! An idea came to me to make a Decorative Cross piece. The dimensions of this piece are 5" wide x 14" tall.


I knew mahogany had a dark rich tone when sealed with a clear sealer. For contrast I squiggled some acrylic turquoise lines to look like turquoise inlay. Since this is the back, I could practice my technique.

A Key hole was installed on the back for easy hanging.



I put a finish on a Leather Cross, then glued on a metal Cross with regular Gorilla Glue. I've never used this glue before, and it worked great! I sawed off the little loop hanger at the top of the metal cross and filed any sharp edges.


I wanted to sand some of the sealer so I could glue on the leather cross. I traced the cross onto contact paper, cut it out and taped it onto the wood.


After sanding, I glued the leather cross onto the wood using Titebond regular.


A pretty nice piece from a scrap of wood that might have been thrown away. Have a great Easter!

Comments